購物須知
結帳櫃檯
手動下單
訂單查詢
站内搜索
軟體破解
下載目錄
問題反映
常見問題
加入最愛
xyz軟體王

xyz軟體王

xyz軟體王

您現在的位置:網站首頁 >> 專業繪圖 >> 3D動畫CADCAMCAE >> 碟片詳情
Qualisyst QMSys Tolerances and Gauges v5.4 Build 10.11.02 工程方案設計軟體 英文破解版
碟片編號:CID5513
碟片數量:1片
銷售價格:200
瀏覽次數:4857

轉載TXT文檔】  
您可能感興趣
您可能也喜歡:
碟片介紹

XYZ軟體急先鋒(http://www.xyz168.net)
 


 
破解說明:安裝完成後,請將光碟 \ Crack 目錄下的檔案,複製到主程式的
安裝目錄內中,並覆蓋, 即可破解!

 

軟體簡介:

Qualisyst QMSys Tolerances and Fits工程方案設計軟體 ,其目的是為了節省時間,避免人為錯誤
在確定機器的名義和限值部分。
英文說明:

The software QMSys Tolerances & Fits is an
engineering program for designers, engineers,
metrologists, quality control planers, machinist and
its purpose is to save time and prevent human errors
in determining nominal and limit values of machine
parts. It can be used to choose a fit and determine
tolerances and deviations of machine parts according
to the following international, European and
national standards:
* ISO 286, EN 20286, ANSI B4.2, GOST 25346 for
nominal dimensions up to 3150 mm
* DIN 7172, GOST 25348 for nominal dimensions over
3150 mm up to 10000 mm
* ANSI B4.1 for nominal dimensions up to 200 inch
* ISO 2768-1 for nominal dimensions without
individual tolerance indications up to 3150 mm

The standard ISO 286 is used as an international
standard for linear dimension tolerances and has
been accepted in most industrially developed
countries in identical or modified wording as a
national standard - ANSI B4.2, GOST 25346, BS 1916,
BS 4500, JIS B 0401, IS 919, AS 1654.

Using the QMSys Tolerances & Fits software the
following tasks can be solved:
* Selection of suitable sizes from the preferred
number series R5 to R80 according to ISO 3, ANSI
Z17.1
* Selection of suitable fits according to ISO 1829,
ISO 286, DIN 7154, DIN 7155, DIN 7157 or ANSI B4.1
* Design of a ISO fit according to ISO 286 for given
clearance or interference respectively
* Determination of dimensional tolerances and
deviations of machine parts
* Calculation of bilateral symmetrical tolerances
for CNC-programs
* Determination of non-prescribed limit deviations
according to ISO 2768

The fit design is processed automatically and after
its completion, the calculation provides the user
with a set of fits whose parameters meet the entered
requirements.

Key Benefits
* QMSys Tolerances & Fits minimizes engineering time
required to specify tolerances and fits of machine
parts.
* Calculations are based on international, European
and national standards.
* The software promotes specification of standard
hole and shaft sizes, tolerances and fits to help
lower operating cost.
* It reduces cost of cutting tools, gages and
material.
* QMSys Tolerances & Fits is a totally flexible
system which fits all tolerancing requirements.
* Information is provided in both inches and
millimetres.
* Calculation reports in TXT, RTF, XML, XLS or HTML
format.
* Multi-language flexible and user-friendly
interface.


 


購物清單
※您必須購物滿500元